The new AMADA EGBe possess an innovative electric drive system that permits ultra-fast, high-precision operation. With press forces of between 400 and 1300 kN and working widths of 1 to 3 meters, this series covers the entire manufacturing spectrum and represents the ideal solution for all bending requirements.
The AMADA EGB-6020e with 600 kN of press force and a beam length of two meters.
With its EGBe series, AMADA has developed an entirely new generation of servo-electric press brakes. What makes them so different? The systems operate purely electrically with only a single electric motor per side, equipped with a clutch for high-precision torque adjustment. This drive is in use in the AMADA EGB-4010e +, the AMADA EGB-6020e and the AMADA EGB-1303ATCe, which range from a press force of 400 kN and beam length of 1 meter through to values of 1300 kN and 3 meters, respectively. “This is an innovative drive system that is unique in the field of press brakes and that is responsible not only for the feed movements but also for developing the press force and ensuring precise positioning,” explains Tankred Kandera, Product Manager for Bending Technology at AMADA GmbH. “At 250 millimeters per second, it not only permits very high feed speeds but also guarantees extremely high-precision bending.” What is more, compared to hydraulic systems, the electric drive is much more responsive, consumes less energy and is easier to maintain, for example because there is no longer any need to change the oil.
Full range
Another highlight takes the form of the AMADA EGB 4010e+. At EuroBLECH 2024, this press brake, which has 400 kN of press force and a beam length of 1 meter, will be presented as a concept machine together with the new AMADA Tool Setup Assistant. This is an innovative tool magazine that keeps frequently used punches and dies ready right next to the machine so that the distances that have to be covered by the operator are shorter. In addition to this ergonomic system, AMADA we’ll also be presenting the AMADA EGB-4010e +. This is the new high-end solution boasting 600 kN of press force and the beam length of two meters. The new EGBe series is rounded off by the AMADA EGB-1303ATCe, the largest of the variants with 1300 kN of press force and a beam length of 3 meters. With these three systems, AMADA is able to offer a full range of servo-electric machines suitable for all types of bending work that will boost the cost-effectiveness of users and simplify the work of operators thanks to their extreme speed, precision and ergonomic design.
In addition to the new EBGe systems, AMADA we’ll also be presenting the hydraulic variant of the AMADA HRB-1303 at the trade fair. This is the proven talented all-rounder for the mid-range segment and can be ideally adapted to specific customer requirements – for example with sheet followers, an angle measurement system, an active crowning system and mobile foot peda
Images: AMADA GmbH
